/*-----------------------------------------------------------------------/1/ Low level disk interface modlue include file (C)ChaN, 2014 /2/-----------------------------------------------------------------------*/34#ifndef _DISKIO_DEFINED5#define _DISKIO_DEFINED67#ifdef __cplusplus8extern "C" {9#endif1011#include <utils/types.h>1213/* Status of Disk Functions */14typedef BYTE DSTATUS;1516/* Results of Disk Functions */17typedef enum {18RES_OK = 0, /* 0: Successful */19RES_ERROR, /* 1: R/W Error */20RES_WRPRT, /* 2: Write Protected */21RES_NOTRDY, /* 3: Not Ready */22RES_PARERR /* 4: Invalid Parameter */23} DRESULT;2425typedef enum {26DRIVE_SD = 0,27DRIVE_RAM = 1,28DRIVE_EMMC = 2,29DRIVE_BIS = 3,30DRIVE_EMU = 431} DDRIVE;323334/*---------------------------------------*/35/* Prototypes for disk control functions */363738DSTATUS disk_initialize (BYTE pdrv);39DSTATUS disk_status (BYTE pdrv);40DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count);41DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);42DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff);43DRESULT disk_set_info (BYTE pdrv, BYTE cmd, void *buff);444546/* Disk Status Bits (DSTATUS) */4748#define STA_NOINIT 0x01 /* Drive not initialized */49#define STA_NODISK 0x02 /* No medium in the drive */50#define STA_PROTECT 0x04 /* Write protected */515253/* Command code for disk_ioctrl fucntion */5455/* Generic command (Used by FatFs) */56#define CTRL_SYNC 0 /* Complete pending write process (needed at FF_FS_READONLY == 0) */57#define GET_SECTOR_COUNT 1 /* Get media size (needed at FF_USE_MKFS == 1) */58#define SET_SECTOR_COUNT 1 /* Set media size (needed at FF_USE_MKFS == 1) */59#define GET_SECTOR_SIZE 2 /* Get sector size (needed at FF_MAX_SS != FF_MIN_SS) */60#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at FF_USE_MKFS == 1) */61#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at FF_USE_TRIM == 1) */62#define SET_SECTOR_OFFSET 5 /* Set media logical offset */6364/* Generic command (Not used by FatFs) */65#define CTRL_POWER 5 /* Get/Set power status */66#define CTRL_LOCK 6 /* Lock/Unlock media removal */67#define CTRL_EJECT 7 /* Eject media */68#define CTRL_FORMAT 8 /* Create physical format on the media */6970/* MMC/SDC specific ioctl command */71#define MMC_GET_TYPE 10 /* Get card type */72#define MMC_GET_CSD 11 /* Get CSD */73#define MMC_GET_CID 12 /* Get CID */74#define MMC_GET_OCR 13 /* Get OCR */75#define MMC_GET_SDSTAT 14 /* Get SD status */76#define ISDIO_READ 55 /* Read data form SD iSDIO register */77#define ISDIO_WRITE 56 /* Write data to SD iSDIO register */78#define ISDIO_MRITE 57 /* Masked write data to SD iSDIO register */7980/* ATA/CF specific ioctl command */81#define ATA_GET_REV 20 /* Get F/W revision */82#define ATA_GET_MODEL 21 /* Get model name */83#define ATA_GET_SN 22 /* Get serial number */8485#ifdef __cplusplus86}87#endif8889#endif909192