Path: blob/master/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
29271 views
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2024 Ampere Computing LLC.
/dts-v1/;
#include "aspeed-g6.dtsi"
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Ampere Mt. Jefferson BMC";
compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
aliases {
i2c20 = &i2c4_bus70_chn0;
i2c22 = &i2c4_bus70_chn2;
/*
* I2C OCP alias port
*/
i2c30 = &ocpslot;
/*
* I2C NVMe alias port
*/
i2c48 = &nvmeslot_0;
i2c49 = &nvmeslot_1;
i2c50 = &nvmeslot_2;
i2c51 = &nvmeslot_3;
i2c52 = &nvmeslot_4;
i2c53 = &nvmeslot_5;
i2c54 = &nvmeslot_6;
i2c55 = &nvmeslot_7;
i2c56 = &nvmeslot_8;
i2c57 = &nvmeslot_9;
i2c58 = &nvmeslot_10;
i2c59 = &nvmeslot_11;
};
chosen {
stdout-path = &uart5;
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x80000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
gfx_memory: framebuffer {
size = <0x01000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
video_engine_memory: video {
size = <0x04000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
vga_memory: region@bf000000 {
no-map;
compatible = "shared-dma-pool";
reg = <0xbf000000 0x01000000>; /* 16M */
};
};
voltage_mon_reg: voltage-mon-regulator {
compatible = "regulator-fixed";
regulator-name = "ltc2497_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
leds {
compatible = "gpio-leds";
led-bmc-ready {
gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
};
led-sw-heartbeat {
gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
};
led-identify {
gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
};
led-fault {
gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>,
<&adc_i2c_2 0>, <&adc_i2c_2 1>,
<&adc_i2c_2 2>, <&adc_i2c_2 3>,
<&adc_i2c_2 4>, <&adc_i2c_2 5>,
<&adc_i2c_2 6>, <&adc_i2c_2 7>,
<&adc_i2c_2 8>, <&adc_i2c_2 9>,
<&adc_i2c_2 10>, <&adc_i2c_2 11>,
<&adc_i2c_2 12>, <&adc_i2c_2 13>,
<&adc_i2c_2 14>, <&adc_i2c_2 15>,
<&adc_i2c_0 0>, <&adc_i2c_0 1>,
<&adc_i2c_0 2>, <&adc_i2c_0 3>,
<&adc_i2c_0 4>, <&adc_i2c_0 5>,
<&adc_i2c_0 6>, <&adc_i2c_0 7>,
<&adc_i2c_0 8>, <&adc_i2c_0 9>,
<&adc_i2c_0 10>, <&adc_i2c_0 11>,
<&adc_i2c_0 12>;
};
};
&mdio0 {
status = "okay";
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&mac0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <ðphy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default>;
};
&mac3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii4_default>;
use-ncsi;
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-64.dtsi"
};
flash@1 {
status = "okay";
m25p,fast-read;
label = "alt-bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-64-alt.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <20000000>;
};
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
bus-frequency = <1000000>;
multi-master;
mctp-controller;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
};
&i2c4 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
i2c-mux@70 {
compatible = "nxp,pca9545";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
i2c4_bus70_chn0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
eeprom@52 {
compatible = "atmel,24c256";
reg = <0x52>;
pagesize = <32>;
};
temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
temperature-sensor@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
temperature-sensor@4a {
compatible = "ti,tmp75";
reg = <0x4a>;
};
temperature-sensor@4b {
compatible = "ti,tmp464";
reg = <0x4b>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0x0>;
status = "disabled";
};
channel@1 {
reg = <0x1>;
status = "disabled";
};
channel@2 {
reg = <0x2>;
status = "disabled";
};
channel@3 {
reg = <0x3>;
status = "disabled";
};
channel@4 {
reg = <0x4>;
};
};
temperature-sensor@4d {
compatible = "ti,tmp75";
reg = <0x4d>;
};
temperature-sensor@4e {
compatible = "ti,tmp75";
reg = <0x4e>;
};
temperature-sensor@4f {
compatible = "ti,tmp75";
reg = <0x4f>;
};
temperature-sensor@28 {
compatible = "nuvoton,nct7802";
reg = <0x28>;
#address-cells = <1>;
#size-cells = <0>;
channel@1 { /* RTD1 */
reg = <1>;
sensor-type = "temperature";
temperature-mode = "thermistor";
};
};
adc_i2c_0: adc@14 {
compatible = "lltc,ltc2497";
reg = <0x14>;
vref-supply = <&voltage_mon_reg>;
#io-channel-cells = <1>;
};
};
i2c4_bus70_chn2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
adc_i2c_2: adc@14 {
compatible = "lltc,ltc2497";
reg = <0x14>;
vref-supply = <&voltage_mon_reg>;
#io-channel-cells = <1>;
};
};
};
};
&i2c5 {
status = "okay";
i2c-mux@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
i2c-mux@71 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
i2c-mux-idle-disconnect;
nvmeslot_8: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
};
nvmeslot_9: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
};
nvmeslot_10: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
};
nvmeslot_11: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
};
};
i2c-mux@72 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72>;
i2c-mux-idle-disconnect;
nvmeslot_4: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
};
nvmeslot_5: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x5>;
};
nvmeslot_6: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6>;
};
nvmeslot_7: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7>;
};
};
i2c-mux@74 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
i2c-mux-idle-disconnect;
ocpslot: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
ocpslot_temp: temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0x0>;
status = "disabled";
};
channel@1 {
reg = <0x1>;
};
};
};
nvmeslot_0: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
};
nvmeslot_1: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x5>;
};
nvmeslot_2: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6>;
};
nvmeslot_3: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7>;
};
};
};
};
};
&i2c6 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&i2c7 {
status = "okay";
temperature-sensor@4f {
compatible = "ti,tmp75";
reg = <0x4f>;
};
};
&i2c8 {
status = "okay";
fan-controller@5c {
compatible = "onnn,adt7462";
reg = <0x5c>;
};
};
&i2c9 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
};
temperature-sensor@18 {
compatible = "jedec,jc-42.4-temp";
reg = <0x18>;
};
temperature-sensor@1a {
compatible = "jedec,jc-42.4-temp";
reg = <0x1a>;
};
};
&i2c10 {
status = "okay";
};
&i2c11 {
status = "okay";
ssif-bmc@10 {
compatible = "ssif-bmc";
reg = <0x10>;
};
};
&i2c14 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
bmc_ast2600_cpu: temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
};
&i2c15 {
status = "okay";
gpio_expander1: gpio-expander@22 {
compatible = "nxp,pca9535";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"presence-ocp1","presence-ocp2",
"","",
"","",
"","",
"","",
"","",
"","",
"","";
};
};
&adc0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
&pinctrl_adc2_default>;
};
&vhub {
status = "okay";
};
&video {
status = "okay";
memory-region = <&video_engine_memory>;
};
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
/*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
"chassis-id-sel",
/*C0-C7*/ "s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
"spd-sel",
/*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
"","","","",
/*E0-E7*/ "eth-phy-rst-n","eth-phy-int-n","","","","","","",
/*F0-F7*/ "s0-pcp-oc-warn-n","","power-chassis-control",
"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
/*G0-G7*/ "","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
"led-fp-sta-amb",
/*H0-H7*/ "jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
"","",
/*I0-I7*/ "","","","","","","power-button","rtc-battery-voltage-read-enable",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","reset-button","","","",
/*M0-M7*/ "nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
"","","",
/*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
"jtag-dbgr-prsnt-n","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
"led-bmc-hb",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","identify-button","led-identify","","spi-nor-access","host0-ready","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
"host0-shd-ack-n","s0-overtemp-n",
/*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","vrd-prg-en-n","","","","host0-special-boot",
/*Z0-Z7*/ "","ps0-pgood","ps1-pgood","","","","","";
ocp-aux-pwren-hog {
gpio-hog;
gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "ocp-aux-pwren";
};
};
&gpio1 {
gpio-line-names =
/*18A0-18A7*/ "","","","","","","","",
/*18B0-18B7*/ "","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
/*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
"","","","",
/*18D0-18D7*/ "","","","","","","","",
/*18E0-18E3*/ "","","","";
};