Path: blob/master/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
29271 views
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2022 Facebook Inc.
/dts-v1/;
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/leds/leds-pca955x.h>
#include <dt-bindings/i2c/i2c.h>
/ {
model = "Facebook Yosemite 4 BMC";
compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
aliases {
serial4 = &uart5;
serial5 = &uart6;
serial6 = &uart7;
serial7 = &uart8;
serial8 = &uart9;
i2c16 = &imux16;
i2c17 = &imux17;
i2c18 = &imux18;
i2c19 = &imux19;
i2c20 = &imux20;
i2c21 = &imux21;
i2c22 = &imux22;
i2c23 = &imux23;
i2c24 = &imux24;
i2c25 = &imux25;
i2c26 = &imux26;
i2c27 = &imux27;
i2c28 = &imux28;
i2c29 = &imux29;
i2c30 = &imux30;
i2c31 = &imux31;
i2c32 = &imux32;
i2c33 = &imux33;
i2c34 = &imux34;
i2c35 = &imux35;
};
chosen {
stdout-path = "serial4:57600n8";
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x80000000>;
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
<&adc1 0>, <&adc1 1>, <&adc1 7>;
};
spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <33000000>;
};
};
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&uart4 {
status = "okay";
};
&uart5 {
status = "okay";
};
&uart6 {
status = "okay";
};
&uart7 {
status = "okay";
};
&uart8 {
status = "okay";
};
&uart9 {
status = "okay";
};
&wdt1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdtrst1_default>;
aspeed,reset-type = "soc";
aspeed,external-signal;
aspeed,ext-push-pull;
aspeed,ext-active-high;
aspeed,ext-pulse-duration = <256>;
};
&wdt2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdtrst2_default>;
aspeed,reset-type = "system";
};
&mac2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii3_default>;
use-ncsi;
mellanox,multi-host;
};
&mac3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii4_default>;
use-ncsi;
mellanox,multi-host;
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-128.dtsi"
};
flash@1 {
status = "okay";
m25p,fast-read;
label = "alt-bmc";
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
spi-max-frequency = <50000000>;
};
};
&i2c0 {
status = "okay";
mctp-controller;
bus-frequency = <400000>;
multi-master;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
"SLOT1_UART_SEL2","","","","","",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
shunt-resistor-micro-ohms = <500>;
};
};
&i2c1 {
status = "okay";
mctp-controller;
bus-frequency = <400000>;
multi-master;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
"SLOT2_UART_SEL2","","","","","",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
shunt-resistor-micro-ohms = <500>;
};
};
&i2c2 {
status = "okay";
mctp-controller;
bus-frequency = <400000>;
multi-master;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
"SLOT3_UART_SEL2","","","","","",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
shunt-resistor-micro-ohms = <500>;
};
};
&i2c3 {
status = "okay";
mctp-controller;
bus-frequency = <400000>;
multi-master;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
"SLOT4_UART_SEL2","","","","","",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
shunt-resistor-micro-ohms = <500>;
};
};
&i2c4 {
status = "okay";
mctp-controller;
bus-frequency = <400000>;
multi-master;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
"SLOT5_UART_SEL2","","","","","",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
shunt-resistor-micro-ohms = <500>;
};
};
&i2c5 {
status = "okay";
mctp-controller;
bus-frequency = <400000>;
multi-master;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
"SLOT6_UART_SEL2","","","","","",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
shunt-resistor-micro-ohms = <500>;
};
};
&i2c6 {
status = "okay";
mctp-controller;
bus-frequency = <400000>;
multi-master;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
"SLOT7_UART_SEL2","","","","","",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
shunt-resistor-micro-ohms = <500>;
};
};
&i2c7 {
status = "okay";
mctp-controller;
bus-frequency = <400000>;
multi-master;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
"SLOT8_UART_SEL2","","","","","",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
};
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
shunt-resistor-micro-ohms = <500>;
};
};
&i2c8 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
i2c-mux@70 {
compatible = "nxp,pca9544";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
imux16: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
gpio@49 {
compatible = "nxp,pca9537";
reg = <0x49>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
imux17: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
gpio@49 {
compatible = "nxp,pca9537";
reg = <0x49>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
imux18: i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
gpio@49 {
compatible = "nxp,pca9537";
reg = <0x49>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
imux19: i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
gpio@49 {
compatible = "nxp,pca9537";
reg = <0x49>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
};
};
&i2c9 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
i2c-mux@71 {
compatible = "nxp,pca9544";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
imux20: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
gpio@49 {
compatible = "nxp,pca9537";
reg = <0x49>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
imux21: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
gpio@49 {
compatible = "nxp,pca9537";
reg = <0x49>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
imux22: i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
gpio@49 {
compatible = "nxp,pca9537";
reg = <0x49>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
imux23: i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
gpio@49 {
compatible = "nxp,pca9537";
reg = <0x49>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
};
};
&i2c10 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
i2c-mux@74 {
compatible = "nxp,pca9544";
reg = <0x74>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
imux28: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
gpio@20 {
compatible = "nxp,pca9506";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@24 {
compatible = "nxp,pca9506";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "","","","",
"NIC0_MAIN_PWR_EN",
"NIC1_MAIN_PWR_EN",
"NIC2_MAIN_PWR_EN",
"NIC3_MAIN_PWR_EN",
"","","","","","","","",
"","","","","","","","",
"","","","","","","","";
};
};
imux29: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&i2c11 {
status = "okay";
power-sensor@10 {
compatible = "adi,adm1272";
reg = <0x10>;
};
power-sensor@12 {
compatible = "adi,adm1272";
reg = <0x12>;
};
gpio@20 {
compatible = "nxp,pca9555";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
"P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
"FAN_BOARD_0_REVISION_1_R",
"FAN_BOARD_1_REVISION_0_R",
"FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
"RST_LED_CONTROL_FAN_BOARD_0_N",
"RST_LED_CONTROL_FAN_BOARD_1_N",
"RST_IOEXP_FAN_BOARD_0_N",
"RST_IOEXP_FAN_BOARD_1_N",
"PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
"PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
"", "";
};
gpio@21 {
compatible = "nxp,pca9555";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
"HSC_OCP_SLOT_ODD_GPIO2",
"HSC_OCP_SLOT_ODD_GPIO3",
"HSC_OCP_SLOT_EVEN_GPIO1",
"HSC_OCP_SLOT_EVEN_GPIO2",
"HSC_OCP_SLOT_EVEN_GPIO3",
"ADC_TYPE_0_R", "ADC_TYPE_1_R",
"MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
"MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
"DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
"", "";
};
gpio@22 {
compatible = "nxp,pca9555";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
"CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
"CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
"CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
"OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
"OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
"EN_P48V_AUX_0", "EN_P48V_AUX_1",
"PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
};
gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
"HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
"HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
"HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
"HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
"HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
"HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
"HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
};
temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
temperature-sensor@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
};
&i2c12 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
i2c-mux@70 {
compatible = "nxp,pca9544";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
imux34: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
eeprom@54 {
compatible = "atmel,24c64";
reg = <0x54>;
};
rtc@6f {
compatible = "nuvoton,nct3018y";
reg = <0x6f>;
};
gpio@20 {
compatible = "nxp,pca9506";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@21 {
compatible = "nxp,pca9506";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@22 {
compatible = "nxp,pca9506";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@23 {
compatible = "nxp,pca9506";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
};
imux35: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&i2c13 {
status = "okay";
bus-frequency = <100000>;
multi-master;
ipmb@10 {
compatible = "ipmb-dev";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
};
&i2c14 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
adc@1d {
compatible = "ti,adc128d818";
reg = <0x1d>;
ti,mode = /bits/ 8 <1>;
};
adc@36 {
compatible = "ti,adc128d818";
reg = <0x36>;
ti,mode = /bits/ 8 <1>;
};
adc@37 {
compatible = "ti,adc128d818";
reg = <0x37>;
ti,mode = /bits/ 8 <1>;
};
power-sensor@40 {
compatible = "ti,ina230";
reg = <0x40>;
};
power-sensor@41 {
compatible = "ti,ina230";
reg = <0x41>;
};
power-sensor@42 {
compatible = "ti,ina230";
reg = <0x42>;
};
power-sensor@43 {
compatible = "ti,ina230";
reg = <0x43>;
};
power-sensor@44 {
compatible = "ti,ina230";
reg = <0x44>;
};
temperature-sensor@4e {
compatible = "ti,tmp75";
reg = <0x4e>;
};
temperature-sensor@4f {
compatible = "ti,tmp75";
reg = <0x4f>;
};
eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
};
i2c-mux@73 {
compatible = "nxp,pca9544";
reg = <0x73>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
imux32: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
adc@35 {
compatible = "maxim,max11617";
reg = <0x35>;
};
};
imux33: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
adc@35 {
compatible = "maxim,max11617";
reg = <0x35>;
};
};
};
i2c-mux@74 {
compatible = "nxp,pca9546";
reg = <0x74>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
imux30: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
adc@1f {
compatible = "ti,adc128d818";
reg = <0x1f>;
ti,mode = /bits/ 8 <1>;
};
pwm@20 {
compatible = "maxim,max31790";
reg = <0x20>;
};
gpio@22 {
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
pwm@2f {
compatible = "maxim,max31790";
reg = <0x2f>;
};
adc@33 {
compatible = "maxim,max11615";
reg = <0x33>;
};
eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
};
gpio@61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
};
};
imux31: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
adc@1f {
compatible = "ti,adc128d818";
reg = <0x1f>;
ti,mode = /bits/ 8 <1>;
};
pwm@20 {
compatible = "maxim,max31790";
reg = <0x20>;
};
gpio@22 {
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
pwm@2f {
compatible = "maxim,max31790";
reg = <0x2f>;
};
adc@33 {
compatible = "maxim,max11615";
reg = <0x33>;
};
eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
};
gpio@61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
};
&i2c15 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
multi-master;
bus-frequency = <400000>;
mctp@10 {
compatible = "mctp-i2c-controller";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
i2c-mux@72 {
compatible = "nxp,pca9544";
reg = <0x72>;
#address-cells = <1>;
#size-cells = <0>;
imux24: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
mctp-controller;
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
imux25: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
mctp-controller;
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
imux26: i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
mctp-controller;
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
imux27: i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
mctp-controller;
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
};
};
&adc0 {
status = "okay";
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
&pinctrl_adc2_default &pinctrl_adc3_default
&pinctrl_adc4_default &pinctrl_adc5_default
&pinctrl_adc6_default &pinctrl_adc7_default>;
};
&adc1 {
status = "okay";
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
&pinctrl_adc15_default>;
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&uhci {
status = "okay";
};