Path: blob/master/arch/arm64/boot/dts/qcom/monaco-evk.dts
29274 views
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "qcs8300.dtsi"
#include "qcs8300-pmics.dtsi"
/ {
model = "Qualcomm Technologies, Inc. Monaco EVK";
compatible = "qcom,monaco-evk", "qcom,qcs8300";
aliases {
ethernet0 = ðernet0;
i2c1 = &i2c1;
serial0 = &uart7;
};
chosen {
stdout-path = "serial0:115200n8";
};
dmic: audio-codec-0 {
compatible = "dmic-codec";
#sound-dai-cells = <0>;
num-channels = <1>;
};
max98357a: audio-codec-1 {
compatible = "maxim,max98357a";
#sound-dai-cells = <0>;
};
sound {
compatible = "qcom,qcs8275-sndcard";
model = "MONACO-EVK";
pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>;
pinctrl-names = "default";
hs0-mi2s-playback-dai-link {
link-name = "HS0 MI2S Playback";
codec {
sound-dai = <&max98357a>;
};
cpu {
sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
};
platform {
sound-dai = <&q6apm>;
};
};
sec-mi2s-capture-dai-link {
link-name = "Secondary MI2S Capture";
codec {
sound-dai = <&dmic>;
};
cpu {
sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>;
};
platform {
sound-dai = <&q6apm>;
};
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pmm8654au-rpmh-regulators";
qcom,pmic-id = "a";
vreg_l3a: ldo3 {
regulator-name = "vreg_l3a";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4a: ldo4 {
regulator-name = "vreg_l4a";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a: ldo5 {
regulator-name = "vreg_l5a";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6a: ldo6 {
regulator-name = "vreg_l6a";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a: ldo7 {
regulator-name = "vreg_l7a";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8a: ldo8 {
regulator-name = "vreg_l8a";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9a: ldo9 {
regulator-name = "vreg_l9a";
regulator-min-microvolt = <2970000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pmm8654au-rpmh-regulators";
qcom,pmic-id = "c";
vreg_s5c: smps5 {
regulator-name = "vreg_s5c";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <512000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c: ldo2 {
regulator-name = "vreg_l2c";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c: ldo4 {
regulator-name = "vreg_l4c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c: ldo7 {
regulator-name = "vreg_l7c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c: ldo8 {
regulator-name = "vreg_l8c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c: ldo9 {
regulator-name = "vreg_l9c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
ðernet0 {
phy-mode = "2500base-x";
phy-handle = <&hsgmii_phy0>;
pinctrl-0 = <ðernet0_default>;
pinctrl-names = "default";
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
nvmem-cells = <&mac_addr0>;
nvmem-cell-names = "mac-address";
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
hsgmii_phy0: ethernet-phy@1c {
compatible = "ethernet-phy-id004d.d101";
reg = <0x1c>;
reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
reset-assert-us = <11000>;
reset-deassert-us = <70000>;
};
};
mtl_rx_setup: rx-queues-config {
snps,rx-queues-to-use = <4>;
snps,rx-sched-sp;
queue0 {
snps,dcb-algorithm;
snps,map-to-dma-channel = <0x0>;
snps,route-up;
snps,priority = <0x1>;
};
queue1 {
snps,dcb-algorithm;
snps,map-to-dma-channel = <0x1>;
snps,route-ptp;
};
queue2 {
snps,avb-algorithm;
snps,map-to-dma-channel = <0x2>;
snps,route-avcp;
};
queue3 {
snps,avb-algorithm;
snps,map-to-dma-channel = <0x3>;
snps,priority = <0xc>;
};
};
mtl_tx_setup: tx-queues-config {
snps,tx-queues-to-use = <4>;
queue0 {
snps,dcb-algorithm;
};
queue1 {
snps,dcb-algorithm;
};
queue2 {
snps,avb-algorithm;
snps,send_slope = <0x1000>;
snps,idle_slope = <0x1000>;
snps,high_credit = <0x3e800>;
snps,low_credit = <0xffc18000>;
};
queue3 {
snps,avb-algorithm;
snps,send_slope = <0x1000>;
snps,idle_slope = <0x1000>;
snps,high_credit = <0x3e800>;
snps,low_credit = <0xffc18000>;
};
};
};
&gpi_dma0 {
status = "okay";
};
&gpi_dma1 {
status = "okay";
};
&gpu {
status = "okay";
};
&gpu_zap_shader {
firmware-name = "qcom/qcs8300/a623_zap.mbn";
};
&i2c1 {
pinctrl-0 = <&qup_i2c1_default>;
pinctrl-names = "default";
status = "okay";
eeprom0: eeprom@50 {
compatible = "atmel,24c256";
reg = <0x50>;
pagesize = <64>;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
mac_addr0: mac-addr@0 {
reg = <0x0 0x6>;
};
};
};
};
&i2c15 {
pinctrl-0 = <&qup_i2c15_default>;
pinctrl-names = "default";
status = "okay";
expander0: gpio@38 {
compatible = "ti,tca9538";
reg = <0x38>;
#gpio-cells = <2>;
gpio-controller;
};
expander1: gpio@39 {
compatible = "ti,tca9538";
reg = <0x39>;
#gpio-cells = <2>;
gpio-controller;
};
expander2: gpio@3a {
compatible = "ti,tca9538";
reg = <0x3a>;
#gpio-cells = <2>;
gpio-controller;
};
expander3: gpio@3b {
compatible = "ti,tca9538";
reg = <0x3b>;
#gpio-cells = <2>;
gpio-controller;
};
expander4: gpio@3c {
compatible = "ti,tca9538";
reg = <0x3c>;
#gpio-cells = <2>;
gpio-controller;
};
expander5: gpio@3d {
compatible = "ti,tca9538";
reg = <0x3d>;
#gpio-cells = <2>;
gpio-controller;
};
expander6: gpio@3e {
compatible = "ti,tca9538";
reg = <0x3e>;
#gpio-cells = <2>;
gpio-controller;
};
};
&iris {
status = "okay";
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/qcs8300/adsp.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/qcs8300/cdsp0.mbn";
status = "okay";
};
&remoteproc_gpdsp {
firmware-name = "qcom/qcs8300/gpdsp0.mbn";
status = "okay";
};
&serdes0 {
phy-supply = <&vreg_l4a>;
status = "okay";
};
&tlmm {
ethernet0_default: ethernet0-default-state {
ethernet0_mdc: ethernet0-mdc-pins {
pins = "gpio5";
function = "emac0_mdc";
drive-strength = <16>;
bias-pull-up;
};
ethernet0_mdio: ethernet0-mdio-pins {
pins = "gpio6";
function = "emac0_mdio";
drive-strength = <16>;
bias-pull-up;
};
};
qup_i2c1_default: qup-i2c1-state {
pins = "gpio19", "gpio20";
function = "qup0_se1";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c15_default: qup-i2c15-state {
pins = "gpio91", "gpio92";
function = "qup1_se7";
drive-strength = <2>;
bias-pull-up;
};
};
&uart7 {
status = "okay";
};
&ufs_mem_hc {
reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l8a>;
vcc-max-microamp = <1100000>;
vccq-supply = <&vreg_l4c>;
vccq-max-microamp = <1200000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l4a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&usb_1 {
dr_mode = "peripheral";
status = "okay";
};
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l7a>;
vdda18-supply = <&vreg_l7c>;
vdda33-supply = <&vreg_l9a>;
status = "okay";
};
&usb_qmpphy {
vdda-phy-supply = <&vreg_l7a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};