Book a Demo!
CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutPoliciesSign UpSign In
torvalds
GitHub Repository: torvalds/linux
Path: blob/master/sound/pci/ice1712/quartet.c
29269 views
1
// SPDX-License-Identifier: GPL-2.0-or-later
2
/*
3
* ALSA driver for ICEnsemble VT1724 (Envy24HT)
4
*
5
* Lowlevel functions for Infrasonic Quartet
6
*
7
* Copyright (c) 2009 Pavel Hofman <[email protected]>
8
*/
9
10
#include <linux/delay.h>
11
#include <linux/interrupt.h>
12
#include <linux/init.h>
13
#include <linux/slab.h>
14
#include <linux/string.h>
15
#include <sound/core.h>
16
#include <sound/tlv.h>
17
#include <sound/info.h>
18
19
#include "ice1712.h"
20
#include "envy24ht.h"
21
#include <sound/ak4113.h>
22
#include "quartet.h"
23
24
struct qtet_spec {
25
struct ak4113 *ak4113;
26
unsigned int scr; /* system control register */
27
unsigned int mcr; /* monitoring control register */
28
unsigned int cpld; /* cpld register */
29
};
30
31
struct qtet_kcontrol_private {
32
unsigned int bit;
33
void (*set_register)(struct snd_ice1712 *ice, unsigned int val);
34
unsigned int (*get_register)(struct snd_ice1712 *ice);
35
const char * const texts[2];
36
};
37
38
enum {
39
IN12_SEL = 0,
40
IN34_SEL,
41
AIN34_SEL,
42
COAX_OUT,
43
IN12_MON12,
44
IN12_MON34,
45
IN34_MON12,
46
IN34_MON34,
47
OUT12_MON34,
48
OUT34_MON12,
49
};
50
51
static const char * const ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS",
52
"Word Clock 256xFS"};
53
54
/* chip address on I2C bus */
55
#define AK4113_ADDR 0x26 /* S/PDIF receiver */
56
57
/* chip address on SPI bus */
58
#define AK4620_ADDR 0x02 /* ADC/DAC */
59
60
61
/*
62
* GPIO pins
63
*/
64
65
/* GPIO0 - O - DATA0, def. 0 */
66
#define GPIO_D0 (1<<0)
67
/* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */
68
#define GPIO_D1_JACKDTC0 (1<<1)
69
/* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */
70
#define GPIO_D2_JACKDTC1 (1<<2)
71
/* GPIO3 - I/O - DATA3, def. 1 */
72
#define GPIO_D3 (1<<3)
73
/* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */
74
#define GPIO_D4_SPI_CDTO (1<<4)
75
/* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */
76
#define GPIO_D5_SPI_CCLK (1<<5)
77
/* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */
78
#define GPIO_D6_CD (1<<6)
79
/* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */
80
#define GPIO_D7_DD (1<<7)
81
/* GPIO8 - O - CPLD Chip Select, def. 1 */
82
#define GPIO_CPLD_CSN (1<<8)
83
/* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */
84
#define GPIO_CPLD_RW (1<<9)
85
/* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */
86
#define GPIO_SPI_CSN0 (1<<10)
87
/* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */
88
#define GPIO_SPI_CSN1 (1<<11)
89
/* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1,
90
* init 0 */
91
#define GPIO_EX_GPIOE (1<<12)
92
/* GPIO13 - O - Ex. Register0 Chip Select for System Control Register,
93
* def. 1 */
94
#define GPIO_SCR (1<<13)
95
/* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register,
96
* def. 1 */
97
#define GPIO_MCR (1<<14)
98
99
#define GPIO_SPI_ALL (GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\
100
GPIO_SPI_CSN0 | GPIO_SPI_CSN1)
101
102
#define GPIO_DATA_MASK (GPIO_D0 | GPIO_D1_JACKDTC0 | \
103
GPIO_D2_JACKDTC1 | GPIO_D3 | \
104
GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \
105
GPIO_D6_CD | GPIO_D7_DD)
106
107
/* System Control Register GPIO_SCR data bits */
108
/* Mic/Line select relay (0:line, 1:mic) */
109
#define SCR_RELAY GPIO_D0
110
/* Phantom power drive control (0:5V, 1:48V) */
111
#define SCR_PHP_V GPIO_D1_JACKDTC0
112
/* H/W mute control (0:Normal, 1:Mute) */
113
#define SCR_MUTE GPIO_D2_JACKDTC1
114
/* Phantom power control (0:Phantom on, 1:off) */
115
#define SCR_PHP GPIO_D3
116
/* Analog input 1/2 Source Select */
117
#define SCR_AIN12_SEL0 GPIO_D4_SPI_CDTO
118
#define SCR_AIN12_SEL1 GPIO_D5_SPI_CCLK
119
/* Analog input 3/4 Source Select (0:line, 1:hi-z) */
120
#define SCR_AIN34_SEL GPIO_D6_CD
121
/* Codec Power Down (0:power down, 1:normal) */
122
#define SCR_CODEC_PDN GPIO_D7_DD
123
124
#define SCR_AIN12_LINE (0)
125
#define SCR_AIN12_MIC (SCR_AIN12_SEL0)
126
#define SCR_AIN12_LOWCUT (SCR_AIN12_SEL1 | SCR_AIN12_SEL0)
127
128
/* Monitor Control Register GPIO_MCR data bits */
129
/* Input 1/2 to Monitor 1/2 (0:off, 1:on) */
130
#define MCR_IN12_MON12 GPIO_D0
131
/* Input 1/2 to Monitor 3/4 (0:off, 1:on) */
132
#define MCR_IN12_MON34 GPIO_D1_JACKDTC0
133
/* Input 3/4 to Monitor 1/2 (0:off, 1:on) */
134
#define MCR_IN34_MON12 GPIO_D2_JACKDTC1
135
/* Input 3/4 to Monitor 3/4 (0:off, 1:on) */
136
#define MCR_IN34_MON34 GPIO_D3
137
/* Output to Monitor 1/2 (0:off, 1:on) */
138
#define MCR_OUT34_MON12 GPIO_D4_SPI_CDTO
139
/* Output to Monitor 3/4 (0:off, 1:on) */
140
#define MCR_OUT12_MON34 GPIO_D5_SPI_CCLK
141
142
/* CPLD Register DATA bits */
143
/* Clock Rate Select */
144
#define CPLD_CKS0 GPIO_D0
145
#define CPLD_CKS1 GPIO_D1_JACKDTC0
146
#define CPLD_CKS2 GPIO_D2_JACKDTC1
147
/* Sync Source Select (0:Internal, 1:External) */
148
#define CPLD_SYNC_SEL GPIO_D3
149
/* Word Clock FS Select (0:FS, 1:256FS) */
150
#define CPLD_WORD_SEL GPIO_D4_SPI_CDTO
151
/* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */
152
#define CPLD_COAX_OUT GPIO_D5_SPI_CCLK
153
/* Input 1/2 Source Select (0:Analog12, 1:An34) */
154
#define CPLD_IN12_SEL GPIO_D6_CD
155
/* Input 3/4 Source Select (0:Analog34, 1:Digital In) */
156
#define CPLD_IN34_SEL GPIO_D7_DD
157
158
/* internal clock (CPLD_SYNC_SEL = 0) options */
159
#define CPLD_CKS_44100HZ (0)
160
#define CPLD_CKS_48000HZ (CPLD_CKS0)
161
#define CPLD_CKS_88200HZ (CPLD_CKS1)
162
#define CPLD_CKS_96000HZ (CPLD_CKS1 | CPLD_CKS0)
163
#define CPLD_CKS_176400HZ (CPLD_CKS2)
164
#define CPLD_CKS_192000HZ (CPLD_CKS2 | CPLD_CKS0)
165
166
#define CPLD_CKS_MASK (CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2)
167
168
/* external clock (CPLD_SYNC_SEL = 1) options */
169
/* external clock - SPDIF */
170
#define CPLD_EXT_SPDIF (0 | CPLD_SYNC_SEL)
171
/* external clock - WordClock 1xfs */
172
#define CPLD_EXT_WORDCLOCK_1FS (CPLD_CKS1 | CPLD_SYNC_SEL)
173
/* external clock - WordClock 256xfs */
174
#define CPLD_EXT_WORDCLOCK_256FS (CPLD_CKS1 | CPLD_WORD_SEL |\
175
CPLD_SYNC_SEL)
176
177
#define EXT_SPDIF_TYPE 0
178
#define EXT_WORDCLOCK_1FS_TYPE 1
179
#define EXT_WORDCLOCK_256FS_TYPE 2
180
181
#define AK4620_DFS0 (1<<0)
182
#define AK4620_DFS1 (1<<1)
183
#define AK4620_CKS0 (1<<2)
184
#define AK4620_CKS1 (1<<3)
185
/* Clock and Format Control register */
186
#define AK4620_DFS_REG 0x02
187
188
/* Deem and Volume Control register */
189
#define AK4620_DEEMVOL_REG 0x03
190
#define AK4620_SMUTE (1<<7)
191
192
/*
193
* Conversion from int value to its binary form. Used for debugging.
194
* The output buffer must be allocated prior to calling the function.
195
*/
196
static char *get_binary(char *buffer, int value)
197
{
198
int i, j, pos;
199
pos = 0;
200
for (i = 0; i < 4; ++i) {
201
for (j = 0; j < 8; ++j) {
202
if (value & (1 << (31-(i*8 + j))))
203
buffer[pos] = '1';
204
else
205
buffer[pos] = '0';
206
pos++;
207
}
208
if (i < 3) {
209
buffer[pos] = ' ';
210
pos++;
211
}
212
}
213
buffer[pos] = '\0';
214
return buffer;
215
}
216
217
/*
218
* Initial setup of the conversion array GPIO <-> rate
219
*/
220
static const unsigned int qtet_rates[] = {
221
44100, 48000, 88200,
222
96000, 176400, 192000,
223
};
224
225
static const unsigned int cks_vals[] = {
226
CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ,
227
CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ,
228
};
229
230
static const struct snd_pcm_hw_constraint_list qtet_rates_info = {
231
.count = ARRAY_SIZE(qtet_rates),
232
.list = qtet_rates,
233
.mask = 0,
234
};
235
236
static void qtet_ak4113_write(void *private_data, unsigned char reg,
237
unsigned char val)
238
{
239
snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR,
240
reg, val);
241
}
242
243
static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg)
244
{
245
return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data,
246
AK4113_ADDR, reg);
247
}
248
249
250
/*
251
* AK4620 section
252
*/
253
254
/*
255
* Write data to addr register of ak4620
256
*/
257
static void qtet_akm_write(struct snd_akm4xxx *ak, int chip,
258
unsigned char addr, unsigned char data)
259
{
260
unsigned int tmp, orig_dir;
261
int idx;
262
unsigned int addrdata;
263
struct snd_ice1712 *ice = ak->private_data[0];
264
265
if (snd_BUG_ON(chip < 0 || chip >= 4))
266
return;
267
/*dev_dbg(ice->card->dev, "Writing to AK4620: chip=%d, addr=0x%x,
268
data=0x%x\n", chip, addr, data);*/
269
orig_dir = ice->gpio.get_dir(ice);
270
ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL);
271
/* set mask - only SPI bits */
272
ice->gpio.set_mask(ice, ~GPIO_SPI_ALL);
273
274
tmp = ice->gpio.get_data(ice);
275
/* high all */
276
tmp |= GPIO_SPI_ALL;
277
ice->gpio.set_data(ice, tmp);
278
udelay(100);
279
/* drop chip select */
280
if (chip)
281
/* CODEC 1 */
282
tmp &= ~GPIO_SPI_CSN1;
283
else
284
tmp &= ~GPIO_SPI_CSN0;
285
ice->gpio.set_data(ice, tmp);
286
udelay(100);
287
288
/* build I2C address + data byte */
289
addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f);
290
addrdata = (addrdata << 8) | data;
291
for (idx = 15; idx >= 0; idx--) {
292
/* drop clock */
293
tmp &= ~GPIO_D5_SPI_CCLK;
294
ice->gpio.set_data(ice, tmp);
295
udelay(100);
296
/* set data */
297
if (addrdata & (1 << idx))
298
tmp |= GPIO_D4_SPI_CDTO;
299
else
300
tmp &= ~GPIO_D4_SPI_CDTO;
301
ice->gpio.set_data(ice, tmp);
302
udelay(100);
303
/* raise clock */
304
tmp |= GPIO_D5_SPI_CCLK;
305
ice->gpio.set_data(ice, tmp);
306
udelay(100);
307
}
308
/* all back to 1 */
309
tmp |= GPIO_SPI_ALL;
310
ice->gpio.set_data(ice, tmp);
311
udelay(100);
312
313
/* return all gpios to non-writable */
314
ice->gpio.set_mask(ice, 0xffffff);
315
/* restore GPIOs direction */
316
ice->gpio.set_dir(ice, orig_dir);
317
}
318
319
static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr,
320
unsigned char mask, unsigned char value)
321
{
322
unsigned char tmp;
323
int chip;
324
for (chip = 0; chip < ak->num_chips; chip++) {
325
tmp = snd_akm4xxx_get(ak, chip, addr);
326
/* clear the bits */
327
tmp &= ~mask;
328
/* set the new bits */
329
tmp |= value;
330
snd_akm4xxx_write(ak, chip, addr, tmp);
331
}
332
}
333
334
/*
335
* change the rate of AK4620
336
*/
337
static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate)
338
{
339
unsigned char ak4620_dfs;
340
341
if (rate == 0) /* no hint - S/PDIF input is master or the new spdif
342
input rate undetected, simply return */
343
return;
344
345
/* adjust DFS on codecs - see datasheet */
346
if (rate > 108000)
347
ak4620_dfs = AK4620_DFS1 | AK4620_CKS1;
348
else if (rate > 54000)
349
ak4620_dfs = AK4620_DFS0 | AK4620_CKS0;
350
else
351
ak4620_dfs = 0;
352
353
/* set new value */
354
qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 |
355
AK4620_CKS0 | AK4620_CKS1, ak4620_dfs);
356
}
357
358
#define AK_CONTROL(xname, xch) { .name = xname, .num_channels = xch }
359
360
#define PCM_12_PLAYBACK_VOLUME "PCM 1/2 Playback Volume"
361
#define PCM_34_PLAYBACK_VOLUME "PCM 3/4 Playback Volume"
362
#define PCM_12_CAPTURE_VOLUME "PCM 1/2 Capture Volume"
363
#define PCM_34_CAPTURE_VOLUME "PCM 3/4 Capture Volume"
364
365
static const struct snd_akm4xxx_dac_channel qtet_dac[] = {
366
AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2),
367
AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2),
368
};
369
370
static const struct snd_akm4xxx_adc_channel qtet_adc[] = {
371
AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2),
372
AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2),
373
};
374
375
static const struct snd_akm4xxx akm_qtet_dac = {
376
.type = SND_AK4620,
377
.num_dacs = 4, /* DAC1 - Output 12
378
*/
379
.num_adcs = 4, /* ADC1 - Input 12
380
*/
381
.ops = {
382
.write = qtet_akm_write,
383
.set_rate_val = qtet_akm_set_rate_val,
384
},
385
.dac_info = qtet_dac,
386
.adc_info = qtet_adc,
387
};
388
389
/* Communication routines with the CPLD */
390
391
392
/* Writes data to external register reg, both reg and data are
393
* GPIO representations */
394
static void reg_write(struct snd_ice1712 *ice, unsigned int reg,
395
unsigned int data)
396
{
397
unsigned int tmp;
398
399
guard(mutex)(&ice->gpio_mutex);
400
/* set direction of used GPIOs*/
401
/* all outputs */
402
tmp = 0x00ffff;
403
ice->gpio.set_dir(ice, tmp);
404
/* mask - writable bits */
405
ice->gpio.set_mask(ice, ~(tmp));
406
/* write the data */
407
tmp = ice->gpio.get_data(ice);
408
tmp &= ~GPIO_DATA_MASK;
409
tmp |= data;
410
ice->gpio.set_data(ice, tmp);
411
udelay(100);
412
/* drop output enable */
413
tmp &= ~GPIO_EX_GPIOE;
414
ice->gpio.set_data(ice, tmp);
415
udelay(100);
416
/* drop the register gpio */
417
tmp &= ~reg;
418
ice->gpio.set_data(ice, tmp);
419
udelay(100);
420
/* raise the register GPIO */
421
tmp |= reg;
422
ice->gpio.set_data(ice, tmp);
423
udelay(100);
424
425
/* raise all data gpios */
426
tmp |= GPIO_DATA_MASK;
427
ice->gpio.set_data(ice, tmp);
428
/* mask - immutable bits */
429
ice->gpio.set_mask(ice, 0xffffff);
430
/* outputs only 8-15 */
431
ice->gpio.set_dir(ice, 0x00ff00);
432
}
433
434
static unsigned int get_scr(struct snd_ice1712 *ice)
435
{
436
struct qtet_spec *spec = ice->spec;
437
return spec->scr;
438
}
439
440
static unsigned int get_mcr(struct snd_ice1712 *ice)
441
{
442
struct qtet_spec *spec = ice->spec;
443
return spec->mcr;
444
}
445
446
static unsigned int get_cpld(struct snd_ice1712 *ice)
447
{
448
struct qtet_spec *spec = ice->spec;
449
return spec->cpld;
450
}
451
452
static void set_scr(struct snd_ice1712 *ice, unsigned int val)
453
{
454
struct qtet_spec *spec = ice->spec;
455
reg_write(ice, GPIO_SCR, val);
456
spec->scr = val;
457
}
458
459
static void set_mcr(struct snd_ice1712 *ice, unsigned int val)
460
{
461
struct qtet_spec *spec = ice->spec;
462
reg_write(ice, GPIO_MCR, val);
463
spec->mcr = val;
464
}
465
466
static void set_cpld(struct snd_ice1712 *ice, unsigned int val)
467
{
468
struct qtet_spec *spec = ice->spec;
469
reg_write(ice, GPIO_CPLD_CSN, val);
470
spec->cpld = val;
471
}
472
473
static void proc_regs_read(struct snd_info_entry *entry,
474
struct snd_info_buffer *buffer)
475
{
476
struct snd_ice1712 *ice = entry->private_data;
477
char bin_buffer[36];
478
479
snd_iprintf(buffer, "SCR: %s\n", get_binary(bin_buffer,
480
get_scr(ice)));
481
snd_iprintf(buffer, "MCR: %s\n", get_binary(bin_buffer,
482
get_mcr(ice)));
483
snd_iprintf(buffer, "CPLD: %s\n", get_binary(bin_buffer,
484
get_cpld(ice)));
485
}
486
487
static void proc_init(struct snd_ice1712 *ice)
488
{
489
snd_card_ro_proc_new(ice->card, "quartet", ice, proc_regs_read);
490
}
491
492
static int qtet_mute_get(struct snd_kcontrol *kcontrol,
493
struct snd_ctl_elem_value *ucontrol)
494
{
495
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
496
unsigned int val;
497
val = get_scr(ice) & SCR_MUTE;
498
ucontrol->value.integer.value[0] = (val) ? 0 : 1;
499
return 0;
500
}
501
502
static int qtet_mute_put(struct snd_kcontrol *kcontrol,
503
struct snd_ctl_elem_value *ucontrol)
504
{
505
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
506
unsigned int old, new, smute;
507
old = get_scr(ice) & SCR_MUTE;
508
if (ucontrol->value.integer.value[0]) {
509
/* unmute */
510
new = 0;
511
/* un-smuting DAC */
512
smute = 0;
513
} else {
514
/* mute */
515
new = SCR_MUTE;
516
/* smuting DAC */
517
smute = AK4620_SMUTE;
518
}
519
if (old != new) {
520
struct snd_akm4xxx *ak = ice->akm;
521
set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new);
522
/* set smute */
523
qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute);
524
return 1;
525
}
526
/* no change */
527
return 0;
528
}
529
530
static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol,
531
struct snd_ctl_elem_info *uinfo)
532
{
533
static const char * const texts[3] =
534
{"Line In 1/2", "Mic", "Mic + Low-cut"};
535
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
536
}
537
538
static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol,
539
struct snd_ctl_elem_value *ucontrol)
540
{
541
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
542
unsigned int val, result;
543
val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
544
switch (val) {
545
case SCR_AIN12_LINE:
546
result = 0;
547
break;
548
case SCR_AIN12_MIC:
549
result = 1;
550
break;
551
case SCR_AIN12_LOWCUT:
552
result = 2;
553
break;
554
default:
555
/* BUG - no other combinations allowed */
556
snd_BUG();
557
result = 0;
558
}
559
ucontrol->value.integer.value[0] = result;
560
return 0;
561
}
562
563
static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol,
564
struct snd_ctl_elem_value *ucontrol)
565
{
566
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
567
unsigned int old, new, tmp, masked_old;
568
old = get_scr(ice);
569
masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
570
tmp = ucontrol->value.integer.value[0];
571
if (tmp == 2)
572
tmp = 3; /* binary 10 is not supported */
573
tmp <<= 4; /* shifting to SCR_AIN12_SEL0 */
574
if (tmp != masked_old) {
575
/* change requested */
576
switch (tmp) {
577
case SCR_AIN12_LINE:
578
new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
579
set_scr(ice, new);
580
/* turn off relay */
581
new &= ~SCR_RELAY;
582
set_scr(ice, new);
583
break;
584
case SCR_AIN12_MIC:
585
/* turn on relay */
586
new = old | SCR_RELAY;
587
set_scr(ice, new);
588
new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0;
589
set_scr(ice, new);
590
break;
591
case SCR_AIN12_LOWCUT:
592
/* turn on relay */
593
new = old | SCR_RELAY;
594
set_scr(ice, new);
595
new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0;
596
set_scr(ice, new);
597
break;
598
default:
599
snd_BUG();
600
}
601
return 1;
602
}
603
/* no change */
604
return 0;
605
}
606
607
static int qtet_php_get(struct snd_kcontrol *kcontrol,
608
struct snd_ctl_elem_value *ucontrol)
609
{
610
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
611
unsigned int val;
612
/* if phantom voltage =48V, phantom on */
613
val = get_scr(ice) & SCR_PHP_V;
614
ucontrol->value.integer.value[0] = val ? 1 : 0;
615
return 0;
616
}
617
618
static int qtet_php_put(struct snd_kcontrol *kcontrol,
619
struct snd_ctl_elem_value *ucontrol)
620
{
621
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
622
unsigned int old, new;
623
old = new = get_scr(ice);
624
if (ucontrol->value.integer.value[0] /* phantom on requested */
625
&& (~old & SCR_PHP_V)) /* 0 = voltage 5V */ {
626
/* is off, turn on */
627
/* turn voltage on first, = 1 */
628
new = old | SCR_PHP_V;
629
set_scr(ice, new);
630
/* turn phantom on, = 0 */
631
new &= ~SCR_PHP;
632
set_scr(ice, new);
633
} else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) {
634
/* phantom off requested and 1 = voltage 48V */
635
/* is on, turn off */
636
/* turn voltage off first, = 0 */
637
new = old & ~SCR_PHP_V;
638
set_scr(ice, new);
639
/* turn phantom off, = 1 */
640
new |= SCR_PHP;
641
set_scr(ice, new);
642
}
643
if (old != new)
644
return 1;
645
/* no change */
646
return 0;
647
}
648
649
#define PRIV_SW(xid, xbit, xreg) [xid] = {.bit = xbit,\
650
.set_register = set_##xreg,\
651
.get_register = get_##xreg, }
652
653
654
#define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2) [xid] = {.bit = xbit,\
655
.set_register = set_##xreg,\
656
.get_register = get_##xreg,\
657
.texts = {xtext1, xtext2} }
658
659
static const struct qtet_kcontrol_private qtet_privates[] = {
660
PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"),
661
PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"),
662
PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"),
663
PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"),
664
PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr),
665
PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr),
666
PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr),
667
PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr),
668
PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr),
669
PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr),
670
};
671
672
static int qtet_enum_info(struct snd_kcontrol *kcontrol,
673
struct snd_ctl_elem_info *uinfo)
674
{
675
struct qtet_kcontrol_private private =
676
qtet_privates[kcontrol->private_value];
677
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(private.texts),
678
private.texts);
679
}
680
681
static int qtet_sw_get(struct snd_kcontrol *kcontrol,
682
struct snd_ctl_elem_value *ucontrol)
683
{
684
struct qtet_kcontrol_private private =
685
qtet_privates[kcontrol->private_value];
686
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
687
ucontrol->value.integer.value[0] =
688
(private.get_register(ice) & private.bit) ? 1 : 0;
689
return 0;
690
}
691
692
static int qtet_sw_put(struct snd_kcontrol *kcontrol,
693
struct snd_ctl_elem_value *ucontrol)
694
{
695
struct qtet_kcontrol_private private =
696
qtet_privates[kcontrol->private_value];
697
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
698
unsigned int old, new;
699
old = private.get_register(ice);
700
if (ucontrol->value.integer.value[0])
701
new = old | private.bit;
702
else
703
new = old & ~private.bit;
704
if (old != new) {
705
private.set_register(ice, new);
706
return 1;
707
}
708
/* no change */
709
return 0;
710
}
711
712
#define qtet_sw_info snd_ctl_boolean_mono_info
713
714
#define QTET_CONTROL(xname, xtype, xpriv) \
715
{.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\
716
.name = xname,\
717
.info = qtet_##xtype##_info,\
718
.get = qtet_sw_get,\
719
.put = qtet_sw_put,\
720
.private_value = xpriv }
721
722
static const struct snd_kcontrol_new qtet_controls[] = {
723
{
724
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
725
.name = "Master Playback Switch",
726
.info = qtet_sw_info,
727
.get = qtet_mute_get,
728
.put = qtet_mute_put,
729
.private_value = 0
730
},
731
{
732
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
733
.name = "Phantom Power",
734
.info = qtet_sw_info,
735
.get = qtet_php_get,
736
.put = qtet_php_put,
737
.private_value = 0
738
},
739
{
740
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
741
.name = "Analog In 1/2 Capture Switch",
742
.info = qtet_ain12_enum_info,
743
.get = qtet_ain12_sw_get,
744
.put = qtet_ain12_sw_put,
745
.private_value = 0
746
},
747
QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL),
748
QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL),
749
QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL),
750
QTET_CONTROL("Coax Output Source", enum, COAX_OUT),
751
QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12),
752
QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34),
753
QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12),
754
QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34),
755
QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34),
756
QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12),
757
};
758
759
static const char * const follower_vols[] = {
760
PCM_12_PLAYBACK_VOLUME,
761
PCM_34_PLAYBACK_VOLUME,
762
NULL
763
};
764
765
static
766
DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1);
767
768
static int qtet_add_controls(struct snd_ice1712 *ice)
769
{
770
struct qtet_spec *spec = ice->spec;
771
int err, i;
772
struct snd_kcontrol *vmaster;
773
err = snd_ice1712_akm4xxx_build_controls(ice);
774
if (err < 0)
775
return err;
776
for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) {
777
err = snd_ctl_add(ice->card,
778
snd_ctl_new1(&qtet_controls[i], ice));
779
if (err < 0)
780
return err;
781
}
782
783
/* Create virtual master control */
784
vmaster = snd_ctl_make_virtual_master("Master Playback Volume",
785
qtet_master_db_scale);
786
if (!vmaster)
787
return -ENOMEM;
788
err = snd_ctl_add(ice->card, vmaster);
789
if (err < 0)
790
return err;
791
err = snd_ctl_add_followers(ice->card, vmaster, follower_vols);
792
if (err < 0)
793
return err;
794
/* only capture SPDIF over AK4113 */
795
return snd_ak4113_build(spec->ak4113,
796
ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
797
}
798
799
static inline int qtet_is_spdif_master(struct snd_ice1712 *ice)
800
{
801
/* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */
802
return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0;
803
}
804
805
static unsigned int qtet_get_rate(struct snd_ice1712 *ice)
806
{
807
int i;
808
unsigned char result;
809
810
result = get_cpld(ice) & CPLD_CKS_MASK;
811
for (i = 0; i < ARRAY_SIZE(cks_vals); i++)
812
if (cks_vals[i] == result)
813
return qtet_rates[i];
814
return 0;
815
}
816
817
static int get_cks_val(int rate)
818
{
819
int i;
820
for (i = 0; i < ARRAY_SIZE(qtet_rates); i++)
821
if (qtet_rates[i] == rate)
822
return cks_vals[i];
823
return 0;
824
}
825
826
/* setting new rate */
827
static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate)
828
{
829
unsigned int new;
830
unsigned char val;
831
/* switching ice1724 to external clock - supplied by ext. circuits */
832
val = inb(ICEMT1724(ice, RATE));
833
outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
834
835
new = (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate);
836
/* switch to internal clock, drop CPLD_SYNC_SEL */
837
new &= ~CPLD_SYNC_SEL;
838
/* dev_dbg(ice->card->dev, "QT - set_rate: old %x, new %x\n",
839
get_cpld(ice), new); */
840
set_cpld(ice, new);
841
}
842
843
static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice,
844
unsigned int rate)
845
{
846
/* no change in master clock */
847
return 0;
848
}
849
850
/* setting clock to external - SPDIF */
851
static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type)
852
{
853
unsigned int old, new;
854
855
old = new = get_cpld(ice);
856
new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL);
857
switch (type) {
858
case EXT_SPDIF_TYPE:
859
new |= CPLD_EXT_SPDIF;
860
break;
861
case EXT_WORDCLOCK_1FS_TYPE:
862
new |= CPLD_EXT_WORDCLOCK_1FS;
863
break;
864
case EXT_WORDCLOCK_256FS_TYPE:
865
new |= CPLD_EXT_WORDCLOCK_256FS;
866
break;
867
default:
868
snd_BUG();
869
}
870
if (old != new) {
871
set_cpld(ice, new);
872
/* changed */
873
return 1;
874
}
875
return 0;
876
}
877
878
static int qtet_get_spdif_master_type(struct snd_ice1712 *ice)
879
{
880
unsigned int val;
881
int result;
882
val = get_cpld(ice);
883
/* checking only rate/clock-related bits */
884
val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL);
885
if (!(val & CPLD_SYNC_SEL)) {
886
/* switched to internal clock, is not any external type */
887
result = -1;
888
} else {
889
switch (val) {
890
case (CPLD_EXT_SPDIF):
891
result = EXT_SPDIF_TYPE;
892
break;
893
case (CPLD_EXT_WORDCLOCK_1FS):
894
result = EXT_WORDCLOCK_1FS_TYPE;
895
break;
896
case (CPLD_EXT_WORDCLOCK_256FS):
897
result = EXT_WORDCLOCK_256FS_TYPE;
898
break;
899
default:
900
/* undefined combination of external clock setup */
901
snd_BUG();
902
result = 0;
903
}
904
}
905
return result;
906
}
907
908
/* Called when ak4113 detects change in the input SPDIF stream */
909
static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0,
910
unsigned char c1)
911
{
912
struct snd_ice1712 *ice = ak4113->change_callback_private;
913
int rate;
914
if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) &&
915
c1) {
916
/* only for SPDIF master mode, rate was changed */
917
rate = snd_ak4113_external_rate(ak4113);
918
/* dev_dbg(ice->card->dev, "ak4113 - input rate changed to %d\n",
919
rate); */
920
qtet_akm_set_rate_val(ice->akm, rate);
921
}
922
}
923
924
/*
925
* If clock slaved to SPDIF-IN, setting runtime rate
926
* to the detected external rate
927
*/
928
static void qtet_spdif_in_open(struct snd_ice1712 *ice,
929
struct snd_pcm_substream *substream)
930
{
931
struct qtet_spec *spec = ice->spec;
932
struct snd_pcm_runtime *runtime = substream->runtime;
933
int rate;
934
935
if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE)
936
/* not external SPDIF, no rate limitation */
937
return;
938
/* only external SPDIF can detect incoming sample rate */
939
rate = snd_ak4113_external_rate(spec->ak4113);
940
if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) {
941
runtime->hw.rate_min = rate;
942
runtime->hw.rate_max = rate;
943
}
944
}
945
946
/*
947
* initialize the chip
948
*/
949
static int qtet_init(struct snd_ice1712 *ice)
950
{
951
static const unsigned char ak4113_init_vals[] = {
952
/* AK4113_REG_PWRDN */ AK4113_RST | AK4113_PWN |
953
AK4113_OCKS0 | AK4113_OCKS1,
954
/* AK4113_REQ_FORMAT */ AK4113_DIF_I24I2S | AK4113_VTX |
955
AK4113_DEM_OFF | AK4113_DEAU,
956
/* AK4113_REG_IO0 */ AK4113_OPS2 | AK4113_TXE |
957
AK4113_XTL_24_576M,
958
/* AK4113_REG_IO1 */ AK4113_EFH_1024LRCLK | AK4113_IPS(0),
959
/* AK4113_REG_INT0_MASK */ 0,
960
/* AK4113_REG_INT1_MASK */ 0,
961
/* AK4113_REG_DATDTS */ 0,
962
};
963
int err;
964
struct qtet_spec *spec;
965
struct snd_akm4xxx *ak;
966
unsigned char val;
967
968
/* switching ice1724 to external clock - supplied by ext. circuits */
969
val = inb(ICEMT1724(ice, RATE));
970
outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
971
972
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
973
if (!spec)
974
return -ENOMEM;
975
/* qtet is clocked by Xilinx array */
976
ice->hw_rates = &qtet_rates_info;
977
ice->is_spdif_master = qtet_is_spdif_master;
978
ice->get_rate = qtet_get_rate;
979
ice->set_rate = qtet_set_rate;
980
ice->set_mclk = qtet_set_mclk;
981
ice->set_spdif_clock = qtet_set_spdif_clock;
982
ice->get_spdif_master_type = qtet_get_spdif_master_type;
983
ice->ext_clock_names = ext_clock_names;
984
ice->ext_clock_count = ARRAY_SIZE(ext_clock_names);
985
/* since Qtet can detect correct SPDIF-in rate, all streams can be
986
* limited to this specific rate */
987
ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open;
988
ice->spec = spec;
989
990
/* Mute Off */
991
/* SCR Initialize*/
992
/* keep codec power down first */
993
set_scr(ice, SCR_PHP);
994
udelay(1);
995
/* codec power up */
996
set_scr(ice, SCR_PHP | SCR_CODEC_PDN);
997
998
/* MCR Initialize */
999
set_mcr(ice, 0);
1000
1001
/* CPLD Initialize */
1002
set_cpld(ice, 0);
1003
1004
1005
ice->num_total_dacs = 2;
1006
ice->num_total_adcs = 2;
1007
1008
ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL);
1009
ak = ice->akm;
1010
if (!ak)
1011
return -ENOMEM;
1012
/* only one codec with two chips */
1013
ice->akm_codecs = 1;
1014
err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice);
1015
if (err < 0)
1016
return err;
1017
err = snd_ak4113_create(ice->card,
1018
qtet_ak4113_read,
1019
qtet_ak4113_write,
1020
ak4113_init_vals,
1021
ice, &spec->ak4113);
1022
if (err < 0)
1023
return err;
1024
/* callback for codecs rate setting */
1025
spec->ak4113->change_callback = qtet_ak4113_change;
1026
spec->ak4113->change_callback_private = ice;
1027
/* AK41143 in Quartet can detect external rate correctly
1028
* (i.e. check_flags = 0) */
1029
spec->ak4113->check_flags = 0;
1030
1031
proc_init(ice);
1032
1033
qtet_set_rate(ice, 44100);
1034
return 0;
1035
}
1036
1037
static const unsigned char qtet_eeprom[] = {
1038
[ICE_EEP2_SYSCONF] = 0x28, /* clock 256(24MHz), mpu401, 1xADC,
1039
1xDACs, SPDIF in */
1040
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
1041
[ICE_EEP2_I2S] = 0x78, /* 96k, 24bit, 192k */
1042
[ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, in, out-ext */
1043
[ICE_EEP2_GPIO_DIR] = 0x00, /* 0-7 inputs, switched to output
1044
only during output operations */
1045
[ICE_EEP2_GPIO_DIR1] = 0xff, /* 8-15 outputs */
1046
[ICE_EEP2_GPIO_DIR2] = 0x00,
1047
[ICE_EEP2_GPIO_MASK] = 0xff, /* changed only for OUT operations */
1048
[ICE_EEP2_GPIO_MASK1] = 0x00,
1049
[ICE_EEP2_GPIO_MASK2] = 0xff,
1050
1051
[ICE_EEP2_GPIO_STATE] = 0x00, /* inputs */
1052
[ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW
1053
and GPIO15 always zero */
1054
[ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */
1055
};
1056
1057
/* entry point */
1058
struct snd_ice1712_card_info snd_vt1724_qtet_cards[] = {
1059
{
1060
.subvendor = VT1724_SUBDEVICE_QTET,
1061
.name = "Infrasonic Quartet",
1062
.model = "quartet",
1063
.chip_init = qtet_init,
1064
.build_controls = qtet_add_controls,
1065
.eeprom_size = sizeof(qtet_eeprom),
1066
.eeprom_data = qtet_eeprom,
1067
},
1068
{ } /* terminator */
1069
};
1070
1071